Outdoor STB Subscribe Terminal BOX 10Pair Network Distribution Box
for STB module
1. Outdoor DP Box Plastic for STB Modules 10pairs
2. Material:PC,with steel rails.
3. Cable grommets for wire entry and exit is for waterproof.
4. For subscribe connector unit unprotection and protection over
voltage and over currence.
5. With lock
6. Application:Ourdoor or indoor
7.The module offers connection point between an exchange-side cable pair and a
YUHUI DP offers Strain relief clamps to hold the drop wires at both
sides.The Drop wire entrance points at bottom (right & left)
have proper rubber grommets with cross cut having provision of drop
wire entrance either flat type or twisted pairs.
The housing and cover of the distribution Point is designed that in
close position, it shall be completely sealed against ingress of
wind driven rain, moisture, snow, dust, insects etc and shall
provide full protection to the terminal block/modules.
Mainly used in terminating cables of secondary telephone networks
to the cable pairs of subscriber lines.
The connection module provides a connection point between an
exchange-side cable pair and a distribution pair. It incorporates a
5-point plug-in module to provide continuity and a range of other
options. Removal of the plug-in module does not disturb wire
connections but makes contacts to them available for testing to
both sides of the network.
YUHUI DP boxes with drop wire modules had successfully tested via
Pressure test,terminal shock test,drop test,bump test,vibration
test,salt fog test,corrosion test,splash proff test,Life
test,durability test,thermal cycle test and heat age test. And
successfully offered to big telecom companies over the world.
It is especially recommended for:
Outdoor connections where the environmental conditions are
Terminations where user development characteristics require future
flexibility in terms of the type of protection or filtering
capabilities.Empty distribution box for 1pair dropwire module(STB
module),offerring good connection environment for
The box consists of a body and cover which house modules on a DIN
rail.Provision for wall mounting is incorporated in the body of the
box. The lid has various opening positions, which can be selected
according to the amount of working space available, and is also
fitted with a seal to limit water entry.
Grommets are provided for dropwire and pair access.
The box locking mechanism is mounted in the base and is effective
on closing the box; to open the box again a special key or a
screwdriver is required depending upon the lock type.Without
indication,the normal pack for the box is with key.
•Material:PC Material For the Box
•Item No.: YH-3011
•1Pcs DP Box and 10 Pc STB Module INSTALLED.
•The subscriber terminal block modules(STB module) could be YH-5027
plug-in module without protection,YH-5028 plug-in module with
over-voltage protection,YH-5029 plug-in module with over-current
and over-voltage protections
•WALL MOUNTED or POLE MOUNTED INSTALLATIONS
•Provide Earthing guide for Connection.
•Good Performance For Waterproof.
•Could be Ordered as Customer Special Request as: UV, VO Protection
for the Box, Good Screw Up to 40N, Filled with Silcon Gelly.
The connection modules are designed for mounting on a standard DIN
rail and can therefore be mounted in a variety of housings in
whatever quantities are required.
The subscriber connector unit consists of a rectangular box base with a cover and a connection
module secured to the base.The top and base are hinged together,
and the top is easily removable to facilitate working in cramped conditions.The cable
grommets for wire entry and exit may be adjusted to conductor size
and are also removable.A metal screw is provided for grounding
Application for replacing Tyco VX-SB subscribe connector unit
terminal blocks,Connecting 1 pair module without protection,module with surge
protection (gas-discharge instrument with surge protection to 230V) and module with overvoltage and overcurrent (overvoltage to 230V, and by two resistors PTC, which protect from
For mounting to walls,wood,metal or concrete poled
Modules are recommended for: the external application, including in
cases when of an environmental condition it is most aggressive, the
end fitting is in cases when at the point of user necessary the
replacement of the types of the elements of electrical protection
or types of the utilized filters.
Outdoor waterproof Distribution Box :The type of STB module is required as your application.
-G is for YH-5027 unprotected,
-R is for YH-5028 with GDT protection,
-O is for YH-5029 with GDT and PTC protection.
standard with expansion bolt for wall mounted.The accessories for
pole mounted is on requirement.
|YH-3010-1||1pair DP box for STB module (EMPTY) 95*45*50mm|
|YH-3010-1G||1pair DP box with STB module(YH-5027) 95*45*50mm|
|YH-3010-1R||1pair DP box with STB module(YH-5028) 95*45*50mm|
|YH-3010-1O||1pair DP box with STB module(YH-5029) 95*45*50mm|
|YH-3010-2||2pair DP box for STB module (EMPTY) 145*95*75mm|
|YH-3011||10pair DP box for STB module (EMPTY) 195*195*85mm|
|YH-3012||20pair DP box for STB module (EMPTY) 350*190*95mm|